HONDA Integra 'R' DC5 Multipoint T45 roll cage kit. MS UK Compliant

Cage Information

Multipoint (weld-in) roll cage:

These have a minimum of 8 point attachments.

Please note, HOWEVER – Because our roll cage will fit very closely to the body-shell it would be normal practice to weld the cage to the shell in at least an additional 8 or 10 places, (and sometimes many more) making a minimum of 16 points.

Weld-in roll cage kit:

Our weld-in kits are supplied with all the parts you need to fit a roll cage.

All the tubes are pre-cut and profiled to fit.

They come complete with the footplates that get welded to the car, as well as all relevant gussets.

FIA / MSUK Compliant Cages:

The roll cage has been made to the FIA prescribed tube sizes. This means the cage was made to comply with all the current regulations. These cages are eligible for all FIA sanctioned events.

MSUK Compliant – See our ‘National’ range:

The roll cage will be made using the minimum MSUK prescribed tube sizes – thicker gauge than we would use in a certificated design, and, so (unfortunately) heavier.

Usually, these are manufactured from CDS (Cold Drawn Seamless) tube – ours is a high tensile material with a minimum tensile strength of 510 Mpa – although T45 can be specified at extra cost.

These cages are eligible for all MSUK events.

Find Out More >

Additional Information

Brand:

Honda

Car Model(s):

Integra

Cage Options:

T45, Weld-in kit

Fitting Type:

Multipoint

Cage Type:

MS UK Compliant, Multipoint

Suitable for:

Hillclimb, Sprints, Time attack, Track days

Weight:

54.0

Download Pdf >

Roll Cage Kit Contents

Your roll cage arrives shrink-wrapped in durable black plastic. And by the way, it is very heavy!

Inside you will find:

CNC formed tubes for the main hoop, A pillar hoops etc with square and profiled ends are necessary.
Straight tubes with profiled ends ready for welding into place.
Set of footplates.
Check list (every tube has an identifying sticker) so you can be sure you have a complete kit (we will have already have checked that you have the right tubes twice before the kit is packed).
Instructions sheet.
CD showing the fully fitted roll cage.

Roll Cage Certification

A roll cage design must comply with the MSA/FIA technical regulations published in the MS UK Blue book. It is the competitor’s responsibility to ensure his/her roll cage complies with the technical regulations appropriate to the event they are competing in.

To compete in any race or rally your roll cage will need to comply with either MSA or FIA regulations. (Effectively, the MSA is governed by the FIA so if a roll cage design complies with FIA regs, then it is also eligible for MSA events). There are some instances where the FIA allows certain design features where the MSA do not (and vice versa).

The certification process generally allows for a lighter roll cage because it is a bespoke design where the diameter and thickness of each tube is optimised to achieve the overall strength required by the FIA/MSA rules.

In order to compete in MSA/FIA events every vehicle, which has a certificated design of roll cage, should have a copy of a valid certificate to present at scrutineering. Custom Cages has certified the majority of popular roll cages. All other roll cages comply with MSA/FIA regulations and receive a Letter of Conformity for competitors to present to scrutineers.

To obtain a certificate for a self-fit roll cage, the installer must complete a Custom Cages weld test.

Custom Cages’ roll cage kits include a weld test sample. Once completed these are returned to the company for load testing. They are subjected to a physical test to assess the actual yield strength of the weld. This ensures that the self-fit roll cages achieve the highest standards of integrity.

Additional samples may be requested.

Certificates will only be issued on completion of a successful test.

Please be aware that there is a charge of £60.00 + VAT for all MS UK / FIA Certificates

Categories

Products

1"1/2 Lap Joint

1"3/4 FIA Lap Joint

1.5m CDS Tube 40 x 2.0mm

1.5m T45 Tube 40 x 2.0mm

35mm FIA Lap Joint

40mm FIA Lap Joint

45mm FIA Lap Joint

AC Cobra Historic T45 roll cage

AC Cobra Daytona Historic T45 roll cage

ALFA ROMEO 105 GTA Historic T45 roll cage kit. FIA Appendix K certificated

ALFA ROMEO 145 Multipoint CDS roll cage kit

ALFA ROMEO 145 Multipoint T45 roll cage kit

ALFA ROMEO 145 National Spec 6 Point CDS roll cage kit. MS UK Compliant

ALFA ROMEO 147 GTA 6 point National Spec CDS roll cage kit. MS UK Compliant

ALFA ROMEO 147 GTA International Multipoint T45 roll cage kit. FIA Certificated

ALFA ROMEO 147 GTA Multipoint CDS roll cage kit

ALFA ROMEO 75 GTV Coupe Multipoint T45 roll cage kit.

ALFA ROMEO Alfasud Multipoint T45 roll cage kit.

ALFA ROMEO Guilia Saloon Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Guilia Saloon Historic T45 roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Junior Zagato Multipoint T45 roll cage kit. MS UK Compliant

ALFA ROMEO Spyder (`63) Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Spyder (`63) Historic T45 roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO TZ Historic CDS roll cage kit. MS UK Compliant to Appendix K

Categories

Products

1"1/2 Lap Joint

1"3/4 FIA Lap Joint

1.5m CDS Tube 40 x 2.0mm

1.5m T45 Tube 40 x 2.0mm

35mm FIA Lap Joint

40mm FIA Lap Joint

45mm FIA Lap Joint

AC Cobra Historic T45 roll cage

AC Cobra Daytona Historic T45 roll cage

ALFA ROMEO 105 GTA Historic T45 roll cage kit. FIA Appendix K certificated

ALFA ROMEO 145 Multipoint CDS roll cage kit

ALFA ROMEO 145 Multipoint T45 roll cage kit

ALFA ROMEO 145 National Spec 6 Point CDS roll cage kit. MS UK Compliant

ALFA ROMEO 147 GTA 6 point National Spec CDS roll cage kit. MS UK Compliant

ALFA ROMEO 147 GTA International Multipoint T45 roll cage kit. FIA Certificated

ALFA ROMEO 147 GTA Multipoint CDS roll cage kit

ALFA ROMEO 75 GTV Coupe Multipoint T45 roll cage kit.

ALFA ROMEO Alfasud Multipoint T45 roll cage kit.

ALFA ROMEO Guilia Saloon Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Guilia Saloon Historic T45 roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Junior Zagato Multipoint T45 roll cage kit. MS UK Compliant

ALFA ROMEO Spyder (`63) Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO Spyder (`63) Historic T45 roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO TZ Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO TZ Historic T45 roll cage kit. MS UK Compliant to Appendix K

ALFA ROMEO TZ Multipoint T45 roll cage kit.

ALLARD J2 Historic CDS roll cage kit. MS UK Compliant to Appendix K

ALLARD J2 Historic T45 roll cage kit. MS UK Compliant to Appendix K

ASTON MARTIN DB3S Bolt-in T45 roll cage

ASTON MARTIN DB4 Bolt-in CDS roll cage MS UK Compliant

ASTON MARTIN DB4 International Historic T45 roll cage kit. FIA Certificated to Appendix K

ASTON MARTIN DB7 6 point Clubman CDS roll cage kit. MS UK Compliant

AUDI 80 6 Point National Spec CDS roll cage kit. MS UK Compliant

AUDI 80 Multipoint CDS roll cage kit.

AUDI 80 Multipoint T45 roll cage kit.

AUDI 80 S2 6 point National Spec CDS roll cage kit. MS UK Compliant

AUDI 80 S2 Multipoint CDS roll cage kit.

AUDI 80 S2 Multipoint T45 roll cage kit.

AUDI A3 MK2 Multipoint T45 roll cage kit.

AUDI A3 MK3 Multipoint T45 roll cage kit

AUDI A4 >00 Multipoint T45 roll cage kit

AUDI A4 >00 6 point National Spec CDS roll cage kit. MS UK Compliant

AUDI Quattro LWB Factory Replica Historic T45 roll cage kit. MS UK Compliant to Appendix K

AUDI Quattro LWB Historic T45 roll cage kit. MS UK Compliant to Appendix K

AUDI Quattro LWB Multipoint International Historic T45 roll cage kit. FIA Certificated to Appendix K

AUDI Quattro SWB Factory Style Historic T45 roll cage kit. MS UK Compliant to Appendix K

AUDI Quattro SWB Historic Historic T45 roll cage kit. MS UK Compliant to Appendix K

AUDI Quattro SWB Multipoint T45 roll cage kit

AUDI R8 Multipoint T45 roll cage kit

AUDI TT MK1 6 point National Spec CDS roll cage kit. MS UK Compliant

AUDI TT MK1 Bolt-in T45 roll cage MS UK Compliant

AUDI TT MK1 Multipoint CDS roll cage kit.